THERMOBILE FK6 flue kit

This complete flue kit provides a minimum of about 5 metres above ground level (check height of flue tee-piece on heater and add 4 metres). The top of the flue should be 1 metre above the roof apex. Additional metre long flue pipes are available to purchase separately to achieve this. The kit also includes a high temperature rubber seal plus sealant and screws to make the roof penetration water-tight. Two wall bands are also provided to support the flue.

Flue Diameter : 6 inches

• ● Kit fits the following:-
• ● R096.6032 - PSO 60 ERP heater
• ● R096.6033 - PSO 90 ERP heater
• ● R096.6034 - PSO 120 ERP heater
• ● R096.6042 - PSG 60 heater
• ● R096.6043 - PSG 90 heater
• ● R096.6044 - PSG 120 heater